BootiDaddy: Nothing close by that I am aware of unfortunately. Will have to look around
online I think, try to measure gear or keep the heli as a spare...three
Swagato Pradhan: my battery i not charging
Anthony Navarro: Perpellers just spin....why?
Owen Frail: My RC helicopter fly's up and down fine but when its in the air it starts
spinning clockwise then I turn the helicopter around then it spins counter
mursu mies: I've got this nikko yellow hornet I never crashed it... and it juust keeps
spinnin just like one u got . Where can i possibly buy those parts?
Henry Montoya: I have a Sky Trooper 3.5CH Land And Sky RC Helicopter and all it does is
spin or take off to the side what is wrong :(
Omar Elfata: help please I fly my 3.5 channel helicopter it flys after I charged it it
Yinsho linda: Hey , can you help me ? I just brought an f-29 from MJX , and every time i
try to take off , my helicopter just bend to the right and falls ... I
never crashed it .
David Shaw: To clarify earlier comment the blade motors are not turning on even though
lights work when switched on, again any ideas anyone?
Ziad Hatem: I crash it in the walls. I have a raider helicopter 4 channel what is the
My bottom rotor stopped working. Its a Udi U812 HummingBird. Advice
please!! (Good vid, rated it thumbs up)
YoungSlick509: i have an M5 3.5 channel heli, and idk if the problem is that it wont
charge or that it doesnt turn on, can some one help me with this problem
BootiDaddy: I have had a look online and can't determine the size of cogs being sold.
Its the M Bladez helicopter from Bladez Toyz
Anthony Navarro: Good video man. I had mine for only 3 days and it just sits on the ground
and the perpe
David Shaw: Avatar gun ship fully charged lights blink I'm very familiar with the
channels problem, charging issues, gear and motor issues but it will not
fly, blades don't turn even thogh lights are on. Any ideas?
BootiDaddy: Thanks taoistflyer. It isn't that as the helicopter was fine for the last
few years :D...I have figured it out though. Basically there are small gear
cogs that are attached to each of the motors - the one which attaches to
motor 'A' has fallen off and gotten lost somewhere. So, the motor spins the
correct way but there is no gear to transfer the power to the rotors 'A'.
Next question is, any ideas where I can get some small cogs from? After
approaching the manufacterer, their delivery charge is.more than what the
cogs are! Lol
BootiDaddy: Any reason why the coaxial blades would spin the same direction? - This is
what seems to be causing mine to spin out of control and not even take off!
u0770408: My helicopter's Trim only twists right, and lots of force is needed for it
to twist left so is there any way i can fix this.
MrJiggsaww: i have the same problem with my avatar 4 channel z008 how do i fix it its
metal frame what could possibly be wrong with it and can somone tell me
what the size of the gear of my heli ?please
TehEpicEvraXD: i just got my new helicopter today, and every time i turn it one, the
lights turn on with it, and it wont let me fly it :'(
its a Eipiditep 5 helicopter its pretty big
TechWhiz: I have a hero H911 and it spins only when Its in the air and I make it go
up. When it goes down its just like normal. I See that the black wire seems
to be loosely attached to the circuit board, but I don't want to try to fix
that before I know how to fix it correctly. Any suggestions?
Jhon Wjas: Mine appears to do what yours does in the video. I can get it in the air,
and I can trim it so that it will fly straight, but if I try to turn it or
trim it in either direction it spins extremely fast. Happens when I turn
left or right. I have yet to attempt a fix, I was just curious if that is
the same problem.
taoistflyer: check the gears and make sure they aren't sliding off each other on the
taoistflyer: Hey Russ It sounds like you've tried some of the fixes I would suggest,
tail motor, trim, pcb so it may be hard to say without actually trying it
myself. It sounds like maybe their is more torque coming from the main
rotors then the tail can handle, maybe a tuning issue or bad spinning part.
The tail motor is only so strong, things like a bad bearing or a shaft
that's rubbing on something or to much pitch in the rotors can overwhelm
the tail motor. You may need to pull the whole thing apart.
rjtaler: I have a WW Toys V 912. It flew great, then started spinning counter
clockwise. Replaced tail motor, didn't help. Just replaced PCB and it still
spins. Please reply with any suggestions. Thanks..Russ
carson willett.: Where can I get I little gear for mo interceptor 052 like that one? Don't
have a spare at my disposal
jerome go: alright! thanks and keep up the good work!
Bazookatone1: My Propel gyrocopter W6625 wouldn't take off, so I replaced the batter.
However it is now displaying this problem, I have examind the rotors, and
the contra rotor is displaying this problem; specifically when the "small"
gear turns a revolution, it briefly sticks, however no gear teeth are
missing. When the helicopter is powered up, there is a clear difference in
the speed of the main rotor and the contra rotor. As well as the spinning
issue, could this be causing my lack of lift?
Jack keville: I just got a new helicopter today, and when i first used it was smooth and
sharp. My dad also has this helicopter, but after a nasty crash today,
every time i take off instead of going straight up, it wobbles like a
spinning top thats going slow. Of course it goes around in the air, but its
annoying because it spins ( left to right, not around) out of control every
now and again on take off. I have compared mine with my dads and they seem
the same (not flying).So that's my Question, Thanks!
rjtaler: Thank you for the reply. I switched the connections on the tail motor and
it fixed it. All I can figure is China got the plus/ minus backwards.
Strange fix...... Oh well, I got a back up pcb if I need it. Thanks again.
taoistflyer: the tail prop, blade or center of gravity could be the problem.
1FaNLin1: my helicopter doesnt spin when i turn it on it spins when i put the remote
control in the front of just in the back, and when the helicopter is in air
i need to follow it with the remote control or the helicopter will fall
down my helicopter is a full metal Kyanite 3.5CH Gyroscope Metal, this
started when my helicopter was normal in the air and suddenly it fall
downs, you know how can i fix it??
taoistflyer: the motor may be damaged or it may simply have some hair stuck in it
slowing it down, pull off the tail blade and make sure theirs nothing
gumming it up.
brandon pack: How can I fix the on and off switch
kenbirzneck: thanks , i think thats my problem , i had a hard landing with my 350 class
coax rotor and now the loweer blade clicks and grinds .....broken motor
gear ? gotta tear her down for closer inspection ....got a dead heli for
bob hernandez: where can you get those little white things other than a other rc
aditya menon: Thanks for the hint.
korzer .: If the problem isn't the batteries in the transmitter, the helicopter, or a
bad motor.. What is it?
pokezionzook: If it makes a bad noise but flies it is most likely a bit of dirt on one of
your gears .
bob hernandez: Thx for the help
taoistflyer: You may need to exchange it, defective helis are a reality.
taoistflyer: It may be that the controller batteries are getting low and not giving the
heli a good charge when you charge through the transmitter, but in that
case the lights on the controller should blink at you to let you know the
batteries are low. Their could be something gumming up one of the rotors
like some hair stuck in a shaft, or maybe the heli battery just can't hold
a good charge anymore, that has been known to happen.
Albert cruz: hi! can you pls. tell me which part of the rc helicopter is the one who
control the spin and trimmer
taoistflyer: That's something that you may need to talk with jada toys about, they might
be able to send you a replacement if you ask nicely.
Jill Belarmino: I have a SYMA apache helicopter and when I charge it for the correct amount
of time it flies, but it loses altitude after about 10 seconds and then
goes to the ground and doesn't come back up. Could it be the battery or
maybe the batteries in the controller?
taoistflyer: check the batteries in the transmitter with a battery tester, if one or two
of them are bad then the helicopter may not be able to charge all the way.
replace the bad batteries in the transmitter or recharge the helicopter
with a usb charging cable.
TerraOblivion27: Question. My skyforce helicopters back propeller works great but the main
one up top wont move at all when I try to fly. I can't see anything broken
but when I try to fly the back propeller makes it do donuts. Any help
taoistflyer: It may be a bad potentiometer in the transmitter stick or the trim dial.
Jhon Wjas: Worked fine when I got it. Flew it around, no crashes. I am a good flyer.
One day I turned it on a tried to fly it and now it spins so fast in either
direction it's crazy. It spins in one direction slightly faster than the
other and the fix didn't seem to make a difference.