stone stoner: wow chaz brown lol thanks alot worked like a charm but still ordering kit
to fix my other key fob so thanks for the temporary fix who would have
known a little foil would work lol
keylessfix: The problem that we correct with the Keylessfix Pad is an issue that is
prevalent only with one generation of GM remotes. Mainly 2005 - about 2010.
You can check our website to see exactly which models have this problem
with their remotes. Older style remotes (like the GMC Savana) generally
only need the dirt cleaned off the contacts or battery replaced and they
will work again.
Alta9610: What is the brand of the frequency detector that you are using on the
FatBastard Pipes: How come you dont offer it for the other GM vehicles, like the GMC Savana?
Chaz Brown: I FIXED MY GM REMOTE KEY FOB SIMPLY USING ALUMINUM FOIL... I JUST CUT OUT
SMALL LITTLE CIRCLES... I JUST GLUED THEM TO THE BACK OF THE RUBBER BUTTONS
ON THE LITTLE PRONG BACK THERE, PUT IT BACK TOGETHER AN WHEN I PUSH THE
BUTTONS NOW IVE GOT CONTACT BETWEEN THE BUTTONS AN THE CIRCUIT BOARD AN
THEY WORK FINE NOW... BEST PART, I ALREADY HAD THE FOIL SO IT WAS FREE TO
Druman19: Instead of paying money for this, just clean your button contacts with some
rubbing alcohol and a q-tip. They get grime on them over time, and stop
bgregg55: This fix works. Shame on GM for not offering this fix rather than selling
you another fob with programming fee for $200 that will only last 2-3
migower: Just got my 2 pontiac G6 remotes back and they work better than new.. Thank
you. I know that my remotes needed the battery terminals re-soldered. You
did an excellent job and would highly recommend you to anyone looking for a
fix to their GM remote. Awesome product and service. Had it back in less
than a week.
Jude Boaz: THANK YOUUUUUUU!!!!
keylessfix: Cleaning the contacts is always a good thing to do, but the remotes that we
designed our pads for have a different problem. Its not the dirt that is a
problem, it is a worn down rubber button pad. The problem is a poorly
manufactured rubber pad and it seems to be an issue limited to one
generation of GM remotes (2005-2010 Cars and Minivans) Our Pads are
guaranteed for life and will not wear down like the rubber pads do.
Richard Bla: Do you make this for a remote to a 2000 impala ls ?
Sam Fisher: I was about to take my remote to the dealership until i found your website.
I have purchased 2 key less fix and will definitely recommend this product.
I have to say this is by far a cheaper fix than the dealership.
John Ranger: Fantastic I would rather give you my 20 bucks them 100 to GM.
keylessfix: The tester is a KENT MOORE model number J-43241. It is the standard tester
that most GM dealerships would use.
bgregg55: Attempting to clean the button contacts only makes the problem worse by
removing more of the conductive paint from the button contacting surface.
keylessfix: Good Job. That is actually how we first started to repair these remotes 4
years ago. But unfortunately it is very hard to permanently glue foil
(metal) to silicon (rubber). Once it comes off, it will float around inside
your remote causing the remote to actuate randomly whenever the loose foil
makes contact to the circuit board. Our solution was to make our Keylessfix
pad which permanently fixes this contact problem.
Fix Your GM factory remote using KEYLESSFIX button replacement pad. 2 Minute repair. Key fob repair.4.6
out of 5