JWDouble07: Great video, saved a lot of trial and error time for me
Hallphamazing305: Fixing my Door Lock Actuator on my 99 Tahoe I drill the old broken one out
do u sell the Door Lock Actuator with a replacement bolts?
CPR Auto Glass Repair: Great how to 88-98 Chevy Truck window regulator installation.
1A Auto Parts: If the cable is hung up on something, you would need to free up the cable
to enable the window to slide down.
Shannon Looper: I need to replace the outside drivers side handle on my '94 Burb. How much
different is the door panel(s) R&R on a '94 from this video? Thanks and
Christopher Ruiz: Thanks a lot for the help, this saved me a bunch of money.
isaac cantu: Hello, thanks for taking your time to make these great videos, they are
very helpful. I have one question, what if my window doesn't roll down? I
want to replace the regulator but can't even start because the window
doesn't roll down.
bkrazy513: how can i tell if my motor for my 97 chevy power windows is bad or if it's
just the regulator...my wife drove it too McDonalds rolled the window down
and now it's stuck down...this happened once before...and i took the door
panel off and ran through the wires and it fixed the problem last
time...but this time i can hear a "Clicking" sound when i try to roll the
window back up...i also ran the wires backwards to make sure it wasn't the
switch...any kind of help would be great.
emunoz2036: How do I roll the window down if my motor isnt working? thanx..
1A Auto Parts: HI Keith, We currently do not have a video that shows this repair. Usually
you need to remove the glass from the window regulator, then remove the
glass out of the top of the door window opening. This may to finagle the
glass and tilt it to remove it from the door. Hope this helps you out.
preston cooley: I have a 1997 chevy tahoe with the left side rear door window regulator
motor has gone out. I bought a replacement motor, but I cannot replace just
the motor because the original motor is permanently attached to the
regulator. does 1aauto have a regulator with the motor allready attached
for the left side rear window of my tahoe? also I do not know what size
those rivets are. I would like to get the correct size to use and replace
the ones I cut out. what size is used for the rivets?
Rafael T: Thanks for walking me through the process. The rod that is connected to the
exterior door handle came loose and the door would not open from the
outside. I used this video to remove the inner door panel and access the
small area behind it. Door works like new and best of all I didn't have to
pay a dime to get it fixed! Keep up the good work and thanks for providing
such great videos.
robert ventura: can i just replace the motor only or do i have to get everything ?
Rockabillybarbie: Who needs a man when we've got YouTube ?! Lol this was very helpful !
kenman1717: i had to do that a couple times on my old 97. had to do the window,
regulator, panels, latch, rod, inner and outer handle, was a mess. needless
to say everything worked a whole lot better afterward. i fixed everything
at once but it all go at once. inner handle froze then broke. someone tried
to break in, broke outer handle and window, then the latch seized up and
the rods bent.
1A Auto Parts: You can find the white lithium grease in your local hardware store. It
comes in a can so that it's easy to spray on hinges and anything that you
would like to grease. We carry a great line of window regulators on our
website 1aauto.com or you can call Tony @ 866-403-3393 Have a great day!
1A Auto Parts: You could try to put some white lithium grease on the regulator channel to
see if that helps to speed it up.
Rey Vazquez: i have a 2006 chevy silverado and the driver's window will not go up or
down what could be the problem? I tried replacing the driver window power
switch but it still wont work. What could be wrong with it if you could
please help me
casey jones: What do you do if the window is stuck in the up position?
Pitz ikata: i have a 99 tahoe, the drivers side window rolls down sometimes and others
gets in a bind and looks like it may break the window. this vid will aid me
in getn it apart but what do i replace. what do look for. also what size
speakers in door so i can replace those while im in there
1A Auto Parts: You should be able to just replace the motor if that's the only thing that
has gone bad. here's a link to the window motors for your Chevy truck on
our website. Just copy and paste this into your browser
mexdogg74: @1aauto ,, YOUR THE MAN!!!! THANKS!!! IT WORKED...
1A Auto Parts: @traper0212 The part that (sounds like) you are describing is part of the
window regulator. We sell them on our website. Here's a link to them.
1A Auto Parts: We currently do not sell a window regulator for the rear door on that
truck. You could either use similar rivets to attach it back to the door or
some small 1/4 screws.
nandilh: I have a 94 gmc n when i push the automatic lock button the passenger side
locks but the driver side doesnt it moves when u try to lock it but dont
lock it just budges a bit could it b sumthin is stuck or need new lock
motor??? Anything idea would b much apreciated before i take it apart cuz i
tried to look before but took me over an hour n could not have done it to
save my life get the clips off the window n lock buttons so i can fully
take off door pannel cuz u cant pull wire an everything o
robert ventura: thank you very much for the info !!!!
travalah: Can manual door be switched to power door on GMC pickup
phazer277: I was talking about the inner. Just the handle part. I did replace mine. It
was metal. Thanks for the video.
1A Auto Parts: There should be a few bolts on the outside of the door, or on the inside,
that hold the latch in place. You would need to remove the door panel to
access it to make repairs. 1aauto.com 888-844-3393
Klowner_760: Do u guys have a video installing front door speakers and stereo? For 97
1A Auto Parts: No problem at all. Have a great day!
1A Auto Parts: @FxOxC Glad to help! Please check out our website or YouTube channel next
time you may need parts or information.
1A Auto Parts: @eramirez189 If you are using the hand remote that is how it works. Push
the button once and the driver door unlocks push it again all the doors
unlock. If it is not that simple then try replacing one of the door lock
actuators and see if that helps 1 door. If so replace them all.
wayne f: Great video I had no idea how to get that plate off to put the window on
1A Auto Parts: We currently do not have an auto repair video on that particular repair.
We'll keep this request in mind during any future repairs.
xK1NGxK1LLAx: Does this cause the window to not roll up and down?
1A Auto Parts: Hi Martin, Once you remove the window crank, the rest should be the same.
Hope this helps you out. Have a great day! 1aauto.com 888-844-3393
Daniel Abraham: Ok, my son shot my window with a BB gun on accident, but it's shattered and
is still in shaped would i still do the same thing?
BASS CHEF: thank yoy for this video i was lost did not know how to replace my driver
side window you saved me alot of cash thank you!!! =D
patrickneal22: can i leave the window up the whole time if i am removing this to get my
outer door handle off?
casey jones: I gotcha. Well it worked this morning. It tends to do this when it gets
really hot outside, it won't function. But when it cools off it starts
working again. I'm going to grease up the track and hope for the best.
Thank you so much for your instructional videos. They have been most
1A Auto Parts: You may be able to, but the process could be a little involved to convert
it over. 1aauto.com 888-844-3393
1A Auto Parts: You may want to test the power going to the switch with a test light to see
if there's power going to it. Also check the fuse to make sure that it's
good. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393
vdeeson: How do I change out the door mechanism inside the door where the door
latches closed. I bought a new door handle for the inside but I don't think
that is it.
CALLAHAN04: So after drilling out the rivets, what will then keep that piece in its'
spot after replacing the regulator? Also, my truck has rivets holding the
speaker in, so what would be the most practical way to hold the speaker in
1A Auto Parts: You would need to remove the window regulator and repair the window motor
and regulator if they are damaged.
1A Auto Parts: If it's on the same vehicle then this video should help you out. 1aauto.com
1A Auto Parts: Thank you for checking us out on YouTube. We offer FREE SHIPPING in the
lower 48 states on all of our auto repair parts found on 1aauto.com
sexybologna111: ok so if my drivers side window wont go all the way down and the power door
lock dont work (on either side) its the window regulator? 89 S10 Blazer
1A Auto Parts: You may be able to leave the regulator in and clean all of the broken glass
inside of the door. Usually you would need to go through the top of the
door with the new glass, depending on the truck you may need to put one
corner of the glass in first and angle it in. Hope this helps you out.
How To Install Replace Window Regulator Chevy GMC Pickup Truck SUV 88-98 1AAuto.com4.6
out of 5