Rhomis Rhemis: I am glad it worked! Cool!
Archie Dayday: WOW! Man you save my day!!! Thank You so much!!!!!!!!!!!!!
Work on Touchmate Tm-Mid730!!!
Rhomis Rhemis: Google search this: "[GUIDE]How To Unbrick Your Galaxy Tab! - xda-developers". I'd PM you the URL, but Youtube has made it so difficult to send and read messages, I can't figure how to do that.
kobe star: does anyone know how to fix a hardbricked galaxy tab 10.1 like this? i have the verizon 4g/wifi
masterofsubway: Hey you do not need to remove the power wires, trust me it will work without removing the power wires. The only thing you need to do is to short those pins the guy in the video tells you to.
I even made a tutorial once to KobyTabletZone how to unbrick your coby. Also I am a specialized computer hardware expert in Quanta, the factory that used to make those Cobys and also the same goes to Haipad
Christhian Lima: Did you ever find the files for your tablet with H27?
eurokid83: Wouldn't it be better to remove the ground wire instead of the positive?
Rhomis Rhemis: Great! I am glad it worked.
Dave Howell: Worked like a charm to unbrick my 7016 after I uploaded the wrong ROM. It took a few tries to get the pins shorted but I got it. The xacto knife trick worked. Thanks a ton.
Kanishka Prasad: how do you unbrick coby mid 8027 !!! and i tried ur tutorial !! with shorting the 7 & 8 pins of the nand chip !! but no response !! please help with this issue !
Tyson Caldwell: Used your process and unbricked a Coby mid7042. THANK YOU! This was a month long process that was simple with this process.
Alex Petrovich: Hi rhomis
I have an emergency question. would you please help me?
I have a MID tablet with Hynix H27ubg8t2btr-bc NAND Flash.
Recently I bricked my tablet by a mistake.
Now it's completely dead and I can't even turn in on.
I'm gonna program it with a programmer.The only thing I need is a Dump file.
Would you please upload this file for me?
chfortinz: rhomis, sorry about my english. I followed your indications and i got the red screen.
But now i want to know how to install the software again?
Thanks for your help.
Nelson Donnell: Thanks for the suggestion, but I've been doing that for the past month and the only site that seems to have a meaningful grasp on the situation is a androidtabletsnet, but presently no remedy yet. If worst comes to worst, I'll just scrap it for parts and make sure that I never buy anything that's associated with Sylvania again.
Rhomis Rhemis: I googled "unbrick synet7lp-ds" and found a few people working on it. Give that a try. You may find something that nobody else has yet discovered.
Nelson Donnell: rhomis, if someone installs the wrong firmware, doing the three finger salute won't work either, they need to find a way to clear the SyncMOS chip and the chip that the wrong firmware is stored on. And no, I haven't taken the time to dig into this yet, I was hoping to hear from Sylvania long before now, but they just ignore us consumers, because they've already gotten their money out of this product and they don't really care about the consumers problems nor their tablet tech design problems.
Rhomis Rhemis: That is a different tablet!
Rest it by One finger on the screen, and one on the power, the other on the menu.
Ashish Kaundal: hi rhimos.my sylvania synet7lp-ds tablet is not geting on.
i think after i install wrong firmware they gone to be dead(Brick).
so please help me to fix it just like this tablet
optimusprimeirc: Here's how to solve the error fwdn here: pastebin_com/yY7Qxyj1
Rhomis Rhemis: Good! :)
Derrick Posner: yeah like 5 seconds after i posted that comment i figured it out ahah thanks though
Rhomis Rhemis: Follow the video on youtube. and the description below it. Your tablet may not show anything yet, but the PC screen should show response.
Derrick Posner: hey my tablet tells me no boot file and the screen stays black how do i isntall software on it if the fwdn isnt starting it?
Dreka August: Hi something wrong wit my screen everytime when i try to type in my lock password when i press the letter A nothing happens
Rhomis Rhemis: Check the video description now. I updated it with a link to get you started.
CBass209J: hey, how can install again the android 2.1? how did you do it? thanks
fid pers: whi you do complicate the open of tablet and when takeof the wire o current first most take of the gruond becouse if you touch any ground dint hapent accident is just an observation
Kevin Chelf: Actually tcc8803_mtd.img. I have a 7127 that is bricked.
Kevin Chelf: And the lk.rom, NAND Data.fai and tcc8900_mtd.img files?
Kevin Chelf: Where can I find the VTC drivers for Win7?
Rhomis Rhemis: I can't tell you what the problem is. Sounds like it is "bricked" or just died on you.
Rhomis Rhemis: You'll have to try starting at the lowest OS, like 2.1, then 2.2, then 2.3, and so on.
Your version "MID1024" is not the same as the MID7015. Perhaps you can search the internet for a different jumper setting.
nikosxania23: hello,i have a mid1024 and i have try to update to 2.3 from 2.2,now is dead//
when i push the power button only the touch lights are opening and after 7 seconds they close to i have try to press the home button and power button but nothing,i have try even this with the 7 and 8 pin but nothing also i have take away the resistor but still nothing,is there any hope??i will be very happy to hear from you..
Harold Washington: Again, once you get the telechips device drivers recognized in your Windows system USB section, you will have the best chance of un-bricking your device using the FWND software program.
Harold Washington: Do not give up no matter how much you try to un-brick the device. I am 62 and have been an electronic experimenter since elementary school.
Harold Washington: I followed this instruction thoroughly. For three days, I got no satisfaction. I used both my desktop and laptop. I bricked my mid7015A while trying to load an image file upgrade. I almost gave up. The key to un-bricking your Coby device is loading the VTC Telechips device drivers. Once my desktop recognized it, the FWND went smoothly. Although my laptop recognized the Telechips USB device, my desktop broke open my device. I shorted a lot of pins. I did not care if the device worked or not.
Marcin Świtała: Hey, thanks for your guide. But i have question... How instal 2.1 OS? When I'm trying to flash boot (I have that red lines) and other files via FWND, it's resting after 'downloading' boot. Do you know how to fix it?
Rodolfo Pino: Hello friend, you video come back to alive my tablet MID X6 XBURST, i do the same that do you and it power on again, thanks.
NotNotKenny: Thanks for the tip!Isee some really low prices on it.
Rhomis Rhemis: It is not worth the cost to fix a broken glass.Get a new one like the AGPtEK TP10A. It is cheaper and way FASTER!! Android 4.0 (Ice Cream Sandwich) 1.2 gHz and no need to ROOT it, modify it or hack it. It's ready to use! Surf the web and has FLASH. Uses mouse and keyboard if you want. As low as $82.00 cheaper than repairing the COBY. Andriod market is loaded too. Have Fun!
NotNotKenny: I have what i think/hope is an easy problem with a mid7015.I dropped the thing and the outter glass part broke.It powersup with no problem but i can't use the touch pad.I know i need a new outter glass but i don't know how to go about replacing it.I don't think it's as easy as just popping the new glass in place.Any vids on this?Sorry for the taking up space with this problem but i can't find one.
Rhomis Rhemis: It is still bricked.
Jumping those TINY PINS is very difficult while trying to hold then when you power up.
Don't give up. Follow the video and Google for more information. You'll get it working.
Tamer Zorba: after i jump pin 7 with 8 .. the tablet is dead .. power is gone .. what should i do to fix that ... its not turn on any more .. please help
Leonardo Stefani: I tried to pass the ANDROID 2.1 firmware, 'he does not recognize the nand and just got the notice of driver connected' ok click on start, he says the message hit very fast ... of which disconnects, connects and disconnects ... try the process again and always the same ... I tried the case on sdcard and does not work
Rhomis Rhemis: It is tricky.
You need to start with ANDROID 2.1 first (SAME instructions),
then again with ANDROID 2.3.1 and finally again to ANDROID 2.3.4
Leonardo Stefani: I say hi from Brazil, I have the same problem. I even on the part of FWDN but got the same error ... which explanation for the error, have any solutions?
Laptop Repairing institute: Laptop Repairing Chip Level Course
We are Providing Chip Level Laptop Repairing Course, LIVE Prectical Traning, Chip Level Laptop Repairing Institute, Chip Level Laptop Repairing Course in India, Laptop Chip Level Course in India.
Laptop Repairing institute: EXPERT INSTITUTE OF ADVANCE TECHNOLOGIES2453, Hudson Line, Top Floor, Kingsway Camp,
(Near G.T.B Nager Metro Station Gate no 4)
New Delhi - 110009
Contact No : 011-47814776,