LEGNetwork: Yeah this doesn't work. I click "pair" and nothing happens.
Diogo Afonso: I had an Error
Call Class Installer fail.. Error code:0X-1ffffdd8
what do i must do ?
afik13: when i unplug and hit the ps3 button the lights flashes none stop,and when
it stops and i hit the ps3 button again it start flashing again and the ds3
tool doesn't recognize the controller..
AAMini Com.: When i try to connect with motionjoy "Adapter MAC" and "Have Paired to" is
different. Help me plz
Paul Smith: HELP my controller wont turn on or come up when i plug it into pc it wont
work at all no lighs nothing!!!!!!!!??? help!
Stene Ryhn: How do I check if a Bluetooth adapter have those (ADR ACL 2/3Mpbs enabled?)
(for checkup to Pre-purchase)
Road2joy1: It had slipped my mind to check the driver manager! Thanks for the helpful
Fuad Hossain: Mine doesn't support enhanced data rate for 25 and 26. Will it still work?
Kevin Prins: When you roll back, does it need to be connection via bluetooth or usb?
Geert Wilders: Is it possible to connect multiple ps3 controllers to one bluetooth
Zafforrian: Will this work with 2 controllers, I hope to play a 2 player game with a
Kevin Triforce: How do you do this with built in Bluetooth?
Ozgen Benli: Not working, controller led is flashing when i unplug the cable
MrArtist2013: Is it able to do this without the cable?
BigDThaBeast: Thanks a lot man!
Blaine Smith: I have been able to get the controller working while plugged in with the
USB, but it doesn't work Bluetooth. The Gamepad Tool shows my bluetooth
adapter under BluetoothPair, as well as my controller, Under the dropdown
box where the controller shows up it says...
MAC:(my controllers mac address, I would guess)
Have Paired to:(my bluetooth mac address)
however, it is not paired because as soon as I unplug my controller from
the USB all the lights flash and it doesn't work anymore. as soon as I plug
it back in it works agian. This is an official Sony Playstation Dualshock3
Sixaxis controller. I have checked the supported features of my bluetooth
dongle and it is compatible. Any ideas why it doesn't work?
Penguin Lord Sauron: When I load the driver it gets the check on it for a second then it goes
back to a cross, any advice?
Hendra Saputra: win 8
Cheezzydude: What if I have a Bluetooth adapter built into my laptop? How do I get that
to show up on the list?
joe hartwig: if you are not using wireless u might fry you controller battier i have
done this. because it is constly charging dose not stop even when the
battier is full
Da Fuqin Brony: what if I have a built in bluetooth?
JonhX3 .: Sincerely I'm starting to hate Motioninjoy so so bad. Why? because at
beginning it works + Bluetooth and all fine. But at random my controller
stops responding for no reason at all. And my character keeps going to the
right. And I'm obligated to leave my game section because of these!!! And
Disconnect my controller. :C (And I have a question) There is a fix for
this??? Or another software or something better than this??? Pls someone
that haves a solution write me back Thanks
J.C.: Sadly this only works with original ps3 controller
sirenz flex: so can i have my logitech wireless controller, with this motion joy thing
for my ps3 controller or will it freak up my pc controller / logitech?
eric chiotti: I can get all of this to work but ds3 tool always makes my pc do a blue
screen and then crash.. is there a fix to this??
Edilson: do you have to have a Bluetooth adapter ?
Jonathan B.: yeahhhhhh, this seems to be happening to me to, what should we do? try a
different controller? (and yes it is a dual shock 3)
JoelPhilosophy: Thanks man. I just ordered a little bluetooth USB dongle for like, £0.50
lol. I already set up my PS3 controller through the USB cable for use with
PSX and PSX2 (by the way, PSX2 is amazing - it upscales PS2 games to full
HD - seriously epic). But I'd rather do it via bluetooth because if I keep
the USB cable plugged in all the time eventually it will wreck the battery
of the controller. So yeah. Thanks :)
Edilson: i connected via Bluetooth but when I do the vibration test it doesnt
work.....actually only the first time, so do you know whats wrong ??
ECiriachi: Worked for me! I tried for so long the old method which involves libusb and
went nowhere. This way is so easy!
leshkraven: I got it to work in the end , I had a knock off DS3 controller . I replaced
the guts with official parts I had spare and it worked
panterathx .: Stay away from this program. It's heavily outdated and will open up a
browser to the site sh.com - a chinese porn site. I would not recommend
this, instead get a different and more supported controller.
dgo346: Unfortunately motionjoy isn't compatible with all internal bluetooth
devices. i did a little research and it says that it is only compatible
with SOME internal bluetooth devices. i also have an internal one, but it
wasn't detected by motionjoy, so i had to buy one.
Mr.Techster: u could get it from the corner store the brand is bluetooth PLS sub to me
leshkraven: It ended up to be a fake PS3 controller I bought , I have recently changed
it to and official and now everything runs smooth . Jus a pain now getting
all the buttons to work for many games using X-Padder :)
Keith Pastor: same
Bacons Demise: Please.Youre the one who dosn't know how to fix the easiest problem LOL!!!
David Fisher: I also got an iogear 4.0 today and it is not being detected by the ds3
tool. It looks like it installed fine on my PC
emshomar: Call Class Installer fail.. Error code:0X-1ffffdd8
JensoftApps: Thank-you :)
Ken Sandnes: Can u connect 4 ps3 to pc? and if so, how do u do that?
Zicer11: look man, instead of using the psx2 or what ever its called, use the xobox
controller layout it works on ALOT of games by default and its way easyier
to use. itll auto connect
JD Davis: just got a iogear bt 4.0 dongle and im on win 7 64bit... and the
bluetoothpair screen is not finding the dongle. It just finds the
controller. Any ideas?
TheCodasaurus: It won't work I tried it too
Kevin Corcoran: DOes not work for me on windows 8. it keeps saying "waiting for
controller". i can hear windows enabling it when i plug it in. I even see
"PS 3 controller" icon pop up in the device screen. looks like its
installed automatically, then i try to calibrate it, and it just sits there
and doesn't detect my button pressing. im lost!
MMD-Nay-PMD: Do I still need a Bluetooth adaptor if I have bluetooth on my laptop
xXAmbientSmokeXx: now under each search result in MijXinput for bluetooth you ctrl+v to paste
at the end it'll be under each. Now search MijXinput.cat delete the whole
line with MijXinput.cat, if you search again it shouldn't be there. save as
MijXinput-mod.inf or MijXinput2.inf (so you have a backup) go back to the
folder C:\Program Files\MotioninJoy\ds3\drivers and delete the old one (you
have a spare on your desktop) and put the modified one in. Change the name
to MijXinput.inf and confirm it
xEclyptical: cool bro
Seán OReilly: Thanks. I had some driver problems in the past but it's working perfectly
PS3 Controller Wireless (Bluetooth) Setup on Windows 74.8
out of 5