Serafin Bague: Can you use an xbox controller with the aerosoft airbus??
Andy Black: this or wilco? i have the justflight a320
TheBadameco: This add-on looks so good! bad my pc don't run FSX :(
brett austin: can anyone help on my FMC i cant type anything in and in the spot ware the
text you type would go it states o. and thats it..... if anyone can help
that would be great thanks
danny3902: do u have to use HD roosterpit to see the fmc
Rlast: @gypolike, I know how to fix this problem! Do you have Skype or something
because you might need some help! :D
Victor Augusto: Hi man,I run the boeing 737 pmdg ngx with about 35 frames with the medium
high settings will my pc run the aerosoft a320 well?.
John Cooper: There is a problem on my FMC. It just write *.0* (Without the *). And I
can't insert anything in it.
musicfvdodge: I have setup everything in the MCDU, but altitude stays at 100 ft and knobs
wont rotate. PLEASE HELP!
Jonathan Winton: Gret vid mate , do another tutorial on how to work the glideslope ILS
please that would be good thanks. PS:subscribed
Prashant mistry: Cost index ranges from 0 to 999 not 10 to 200 CI is basically fuel burn in
a given time ..so the more less the number is the less fuel you'll burn i.e
compromising on time :) my company's CI is 6 :o
homy taka: how can i use this software i played but about heading or altitude i have
problem when the autopilot is on i can't change.
Amar Chan: where do you get the waypoints from kkovachev ?????? someone please reply
ozzmcom: hello , I've got a problem with the fmc , everything on it works except
from the destination section where you enter from/to . I write 4-letter
airport code/4-letter airport code on the scratch pad but when I try to
apply it on the from/to section nothing happens. Only another / character
appears on it. Also I've seen some people have issues with the throttle
Unfortunetely this aircraft's throttle won't work with keyboard. It is a
huge design fault and aerosoft admit it themselves.
Fsimfreak: @Fsimfreak Oh, you scroll with your mouse. figured it out :) thanks
Iflyfsx: wh do you stress so much on your words
SgtPhil Miller: where you got this plane? Bought or Downloaded for Free?
Daohanleem: @kkovachev Hey how did you save the waypoints from rfinder?
ceconk123: can you make a full flight tutorial?How to control autopilot or where to
select STAR to autoland etc. This plane confused me so much after MD-11
Ghost Protocol: Hi there.. How do u turn off the auto rudder on the MCDU page ?
Isaac Slepian: I think your zero fuel weight is off, did you put 52 i cant tell
notimg: greaat video ! and how you put the waypoint with way, mean like U319 to
PUDO? And the rwy for dep and arr ?
MrTsnitros: Great Video M8 It Helps Alot, I Have One Problem Hope You Can Help, Cause
Im Very Close To Throwing My Laptop Out The Window, I Got On The Runway
Everything Was Set And I Went To Start Putting The Throttle Onto Full And
Within 2 Seconds It Cuts Out And Goes Back To Idle And A Master Warning
Comes Up, What Av I Done Wrong?? Thanx.
JetlinerX: @TheOneManBand14 Its because yours is torrented.
Seal552: Great video really helped but just one thing how do you turn the altitude
and speed selector knobs every time I left or right click it, it doesn't
increase or decrease please help.
JetlinerX: @GREENY7798 Get a legal copy.
Fahed Enizi: I have the same problem and did exactly as you did and it didn't work and
had the 0. I will ask you :) did you found a solution for your problem?
jane doe: Nice english
Kristiyan Kovachev: @konar96 daam
SIMULEIROS: did you buy this plane??
Brian20351: scroll up and down with a mouse. had the same problem.hope this helps
hgvwi: Thanks man for all ! :))
Prashant mistry: i m a real wrld pilot and i fly A320 4 future pilots i recommend u to fly
the Wilco pub's feelthere A320.its the most realistic aircraft I've ever
seen in F sim u will have 2 compromise on sme overhead buttons but d
maneuvering of the aircraft is good furthermore both the Aerosoft and wilco
are totally different while landing(below 50 feet)Actually below 50 feet
the aircraft goes into direct law so more stick input will give you
slightly less reaction........
Taisir Jabba: @gypolike That happened to me, the way I fixed it was that not during a
flight but in FSX menu y went to controls and you have to select only 1
axis to throttle. Maybe you have a nother controller that has been selected
as well. So just select one and verify it.
Parker Birdwell: this is prolly a stupid question but where exactly do u get your waypoints?
Martin Husebø: I still doesn't know how to make the plane autoland after a autoflight.
When on cruise or descent or approach or so i'm trying to set the freqs
into the navrad display in the fmc, but it won't be put in!! The numbers I
write in on the scratch doesn't show up after clicking, either that or
letters starts to show up instead of the numbers! I have done EVERYTHING
the manual tells me to, can someone help me? :D
Thomas Mullen: hey can you make tutorial on the autopilot systems and stuff and how to
work it correctly becuase i just bought the Airbus X and im not sure how to
work the autopilot includin landing.. Please help!!!
minisherl: Yeah I did. Always do. Its really annoying i know
cloudyjojo: can you do a tutorial on how to start up the aircraft from a cold and dark
roosterpit? Excellent video by the way!
Casper hvid rasmussen: What about sids and stars?
michael willis: if it's not a proper English tutorial then say so. watch pilot767 for an
Andres Millonario: hello friend, sorry my English. I have a problem with Airbus X, A when
using the plane I can not touch the buttons or anything, and after a few
minutes I was frozen and I get the fsx. Will not know why? thanks
markjjblackops: @gypolike I had this problem too. All you have to do is go to the aerosoft
launcher program which the addon came with. Then go to tools, configure
joystick, and assign each axis to a certain command. EX. Y axis to roll.
Hope this helps!
Fahed Enizi: fantastic but I have on my MCDU when I press (inta) at the bottom there is
0. and I cant write any thing I press it but nothing happens ...please help
Kristiyan Kovachev: @CoolSpiffy1 You can see me entering the route at 1:14 which is LBSF/LBBG ,
the plane will still fly on autopilot with that route set, it will lead you
not in the right direction of the approach/runway :)
Andrew Ayad: Is fly by wire accurately modelled on this add on, I mean like if an engine
failures occurs, will fly by wire handle the aircraft just like the real
Dubstepishere: Helloooo Guys this IS CHRiiiis, THIIIIS! :D
▂▃▅▆ ＧＡＭＥＳ & ＭＯＲＥ ▆▅▃▂: Very nice work dude :)
Elvexa: why is the paint on the concrete flickering
BlazeCinemaSR: my left ear loved this!
FSX TUT - Aerosoft Airbus X A320 FMC / MCDU Tutorial (HD)4.1
out of 5