Mig Welding Aluminum, Stick Out




What do you think about this video?

Richard Campos Sr: When welding aluminum it has it's own distinct spraying sound a good weld will be nice and clean,should be able to wipe over it smoothly with a cheese cloth rag with no hang up's. Inspectors weld test given inside aluminum milk tanker trailers

John Cunningham: I turned on the english caption............funny funny

george bushem: If you want a good laugh turn on closed captioning LMAO 1:15 "they were not well it's apparently created a pig"

niall300zx: cant complain about that

Kevin Rausl: You're not in the full spray mode. I can tell that by sound and by splatter around your weld. And stickout doesn't have much to do with transfer modes. 

Big Kaz: Aie aie aie not realy good sorry. Not regular and not weld.. It s call sticky welding

westpaddy76: i dun undastand clialaa

YesYouKnowYourStuff: Great Video

BycraftWelding: I know everyone is a critic. However, contact tip to work distance is definitely not the key factor in determining your transfer mode when welding and really only has a minimal effect on amperage in the arc. Once setting an adequate wfs to make your desired sized weld, voltage is what does it (speaking for the CV welding process here)

Evan Metzger: Keep your hand very stable when welding and move it up and down a little bit to get a flat solid strong weld

gary mathews: that is a great looking bead !

Orangebike666: What sheilding gas?

Jess Nidnal: Thanks. What type of wire and gas did you use? Is it straight Argon?

Felix Ceniceros: Great video!

Mon S: what type of AL wires use for mig weld in this video ?

Paddy B: Keep em coming

Tosseef Hussain: Thanks for the video pal, Just what I needed to know as I'm currently welding aluminium tube to cast aluminium inlet manifold.

Mon S: what type of AL wires use for mig weld in this video ?

Paul Parce: Thanks for the help!

51diogenes: Great video! You've helped me enormously. Thanks

SeeingUFOsCA: Thank you, now I know what I was doing wrong. My wire feed is to slow.

Paddy B: Great. I didn't know I could do that... Sweet

Jacob Burkert: i really dont mean to be a critic and since it was just a practice T joint it doesnt matter but the angle you showed the weld mad it look as if it had cold roll. may have just been the angle but thanks for the tips on gun angle it did help very much.

Rating:
Mig welding aluminum, stick out 3.9 out of 5

Shared by Others

Mig welding aluminum. stick out
Mig welding aluminum. stick out
Mig Welding Aluminum with a Spool Gun - Aluminum Mig Welding - Mig Aluminum Welding
Mig Welding Aluminum with a Spool Gun - Aluminum Mig Welding - Mig Aluminum Welding
Aluminum MIG Welding With Basic Equipment (Under $500) and NO Spoolgun
Aluminum MIG Welding With Basic Equipment (Under $500) and NO Spoolgun
Welding Aluminum with a MIG spool gun for the first time EVER
Welding Aluminum with a MIG spool gun for the first time EVER
Mig Welding Aluminum - Lincoln PowerMig 350mp part1
Mig Welding Aluminum - Lincoln PowerMig 350mp part1
How to Weld Aluminum on DC + with Argon
How to Weld Aluminum on DC + with Argon
Aluminum welding an outboard transom with a Lincoln AC/DC 225 Stick Welder
Aluminum welding an outboard transom with a Lincoln AC/DC 225 Stick Welder
When to Use MIG Welding vs. TIG Welding - Weld.com and Kevin Caron
When to Use MIG Welding vs. TIG Welding - Weld.com and Kevin Caron
Aluminum Welding Training on your own at home
Aluminum Welding Training on your own at home
MIG Welding Aluminum without a Spool Gun
MIG Welding Aluminum without a Spool Gun
Back to Basics: AC Aluminum TIG Welding for Beginners with Kevin Caron   TIG Time
Back to Basics: AC Aluminum TIG Welding for Beginners with Kevin Caron TIG Time
How to Weld 3/8
How to Weld 3/8" Aluminum Fillet Welds with 160 AMPS TIG Time
Mig Welding Aluminum - Hobart Welder & Spool Gun
Mig Welding Aluminum - Hobart Welder & Spool Gun
Introducing the Longevity ProMTS 200 MIG / TIG / Arc Welder - Kevin Caron
Introducing the Longevity ProMTS 200 MIG / TIG / Arc Welder - Kevin Caron
How to Weld Aluminum on DCEN: Part 2   TIG Time
How to Weld Aluminum on DCEN: Part 2 TIG Time
Mig Welding Aluminum with a Hobart IronMan 230 Welder
Mig Welding Aluminum with a Hobart IronMan 230 Welder
Mig welding aluminum without spool gun
Mig welding aluminum without spool gun
MIG Welding Aluminum with Hobart Ironman and Miller Spoolmate
MIG Welding Aluminum with Hobart Ironman and Miller Spoolmate
How to Bump Weld Anodized Aluminum for Marine Applications   TIG Time
How to Bump Weld Anodized Aluminum for Marine Applications TIG Time
AHP AlphaTIG 200X Review: Part 2   AC Welding
AHP AlphaTIG 200X Review: Part 2 AC Welding
How to Become a Certified Welder   D17.1 Flat Plate Aluminum
How to Become a Certified Welder D17.1 Flat Plate Aluminum
Miller Millermatic MIG Welders - Aluminum Welding
Miller Millermatic MIG Welders - Aluminum Welding
Mig welding aluminum with basic mig welder. Part 2
Mig welding aluminum with basic mig welder. Part 2
Harbor Freight TIG Welder Review   TIG Time
Harbor Freight TIG Welder Review TIG Time
Bollinger Shipyards and Advanced Pulsed MIG Welding on Aluminum
Bollinger Shipyards and Advanced Pulsed MIG Welding on Aluminum
Everlast PowerPro 164: TIG Welder Review   TIG Time
Everlast PowerPro 164: TIG Welder Review TIG Time
Cast Aluminum Harley Davidson Weld Repair   TIG Time
Cast Aluminum Harley Davidson Weld Repair TIG Time
Fabricating Exhaust Parts -EricTheCarGuy
Fabricating Exhaust Parts -EricTheCarGuy

Featured Video