MrBingping: Was the neck angle already set when you got it? Or did you have to set it?
I bought a 335 kit from another dealer and when I set the neck I found that
the angle of the neck pocket was wrong
whhitestallion: Canadian haha
Robert Burns: Precision guitar kits are made in Vancouver B.C.
chazzy968: Nice!!! :D I've been considering Precision Guitar Kits for my first LP
build; they seem to have the best kits out there. What pickups did you use?
I really like Peter Florance Voodoo 59 or Sheptone PAFs. I'll most likely
go with Peter Florance though; really like them!
Clinton Mills: Did you use grain filler on the back and sides of the body?
MrBluesman14: Google "Precision Guitar Kits". It should be the first cite.
MrBluesman14: @cajunboy2k yes the music is played on the kit. But it is a comparison to a
57 reissue gibson. The kit plays first then the gibson second and they
rotate. except on the distorted section where they each play soft
distortion then hard distortion before switching. The kit came to me only
needing some sanding. I haven't found any faults other than the tuner holes
only fit bigger size tuners(like grover) and the bridge and tailpiece holes
will only fit the specific ones on the website.
rwieber79: Where can I find this kit?
MrBluesman14: @robottony1 These are bumblebee capacitors. they were made back in the day
for 59 les pauls. Its good to experiment with different ones to get a feel
for what you like.
Hayden Ross: You should have enough time for everything but the paint. remember you have
to wait for it to dry and do multiple coats. Other than that it didn't take
too long to put the hardware in.
toneman622: I am going to get one of these precision kits...looks like the best one out
there.I like the way you set the neck...surprised that you finished the
guitar first thou... THX!
Chris McMahon: Outstanding :)
TheGinYoung: What is that colour on the top? Did you mix it or can it be bought?
MrBluesman14: I sent it to a local painter. To my knowledge he did not use grain filler
but I could be wrong. There are some great tutorials on how to paint
guitars on youtube though. Check out Sullys Guitar Garage.
Chris McMahon: I'd rather have your build than a Gibson, and I mean it! Better quality
everything and better neck joint and headstock angle Love the Bumblebees. I
feel the LOVE :D
robottony1: Resistors instead of capacitors! why would you do this?
silverhand1965: Made in Ontario Canada actually
MrBluesman14: @MrBluesman14 Sorry it wouldn't let me extend the comment any longer. Here
is the rest. I believe that you can choose on their website what size holes
you want drilled for all of these things. If you plan on doing the entire
kit be sure to use wood filler or sanding sealer before painting the
headstock black because you can see the pores if you don't.
cajunboy2k: I really like this video. Is the music made on the guitar from the
Precision kit? Its beautiful by the way. I'm looking at getting a kit
myself at the first of the year. What is your impression of them? If there
are any faults with the kit, what would they be? Thanks
MrBluesman14: hey. sorry if you didn't get my reply from my other account. It doesn't
take long to wire it up and set the neck but painting is the most time
consuming part. I'm not sure if you would have enough time to do the
multiple coats needed and drying process.
MrBluesman14: @TheGinYoung the color is cherry red. I had a local painter (matt danser)
do it for me. I think he used the stewmac nitro on it. Its a really great
Nick Mai: SO HOW MANY HOURS DID THIS TAKE YOUR BTW'S IT IS CAPS IN ORDER TO GET YOUR
ATTENTION P.S I WANT TO DO ONE FOR A SCHOOL PROJECT AND IT HAS TO TAKE LIKE
A MONTH WITH LIKE 3 HOURS A WEEK SO LIKE 12 HOURS TOTAL THANKS