Harley Nightster Mods




What do you think about this video?

IIIsticksone: I was able to. It was a pain, and the stock part got scratched up a bit. I did not want to take the pipes off either because of that one bolt that is impossiable to reach!

lanceoa: Awesome mods... gd work! Cant wait to get my hands on the Nighty!

IIIsticksone: It does allow a lot more air in vs the stock cleaner. If you have aftermarket pipes then you will need some sort of fule manager. I am going with the race tuner but there are others that are cheaper. Hope that helps, I will keep you posted on how it does after the Sereaming Eagle Race Tuner.

IIIsticksone: @mindthreat44 How about $50.00. I will tell you that they are for a wide glide front end. I like them but you may not.

Brian Holloway: NICE!!!! keep ridin!

IIIsticksone: @brandonm1392 Well, yes other wise I would have bought a crotch rocket. But with those pipes and air cleaner along with the SEST I was able to get about 20 more hp over stock. So I am happy with both the looks and performance.

IIIsticksone: Thanks for the kind words. My bike seemed to have a little better response with the Screaming Eagle air cleaner, but this may be because the download that the dealer installed was for that air cleaner. I had my 10k service done the other day and my plugs were scary white so I have to believe that the joker air cleaner can be better then the SE if it is tuned. I am getting the race tunner done in a couple of weeks so I will have a better idea then.

OlyMar83: the bike is great the camera is even better! ahah What kind is it??

bdubdgaf: real nice look'n, i really like the solo bag, i've been holding off on getting one because I couldnt find a style I liked, but that bag fits the nightster perfect.

IIIsticksone: @scienceguy72 I used J&P part number 310-135 It gave me the right look for $20.00. Hope that helps.

IIIsticksone: Thanks man! The Z bars were great, no problems. I did switch them out for some 14" Nash Grits, just to change it up a bit. I did 2 vids of me installing them, check them out if you have time. I think one of the most comfy seats is the Mustang it just wasnt the look I wanted. Check out the XL forums for some great mods that other people have done. Lots of good ideas to get you going. Ride safe>

hoohoohoblin: Great video! Very thorough. It's great that you explain where you got everything and how hard it was to install. The Harley Nightster looks good from the factory, but you made it even better. Thanks.

rmh1120: did you put that sproket cover on without removing the pipes? I justttt put shortshots on and don't feel like takin them off again if i don't need to!

IIIsticksone: Sweet! Post a vid when it is done. Good luck and ride safe.

IIIsticksone: @mindthreat44 They are from Pagcho. I had them powdercoated black. I do not run them anymore, if you like them I can sell them to you.

Kyle Neva: Bro this is the sickest Nightster I've ever seen!!! Everything you've done is very tasteful. I just got mine last week and was thinking of doing most of this stuff to mine and now I know where to get most of it. Thanks for the inside. BTW does Joker Machine ever do any promos?? That stuff is nice but spend. It does look super high quality though. Once again sweet bike!!!

druun1t: I have the same A/C..... Harley head bolt covers.... the black with chrome line. its in the catalog. They fit perfectly over those brass colored bolts and secure nicely. You gotta get them wires inside the bars. But otherwise looking good. The gas cap makes this bike yours. Nice touch

IIIsticksone: @OlyMar83 It is a flip that I pick up on sale for $48!

IIIsticksone: It was pretty easy, you will need a set of Torq bits to lossen the shock mount.

IIIsticksone: Just an update. I had the dealer install the Screaming Eagle Super Turner yesterday and according to the Dyno sheet I am at 76 hp which is pretty good over stock.

Riyadh Al Rasheed: hey man nice mods ... cool :) I bught a 2009 nightster , (2 ones Sliver/Black) wonder what i should do it with it in terms of mods. s the Z-Bar comfy for the long rides ? and the seat , ya i admit it , it s not comfy at a ll , found this brawler seat from Harley site, don't know if it would be a good choice, lemme know what u think .... peace ;)

IIIsticksone: Thanks for the comments. You will be happy with that list. They are quality products. Do you have aftermarket pipes? If so you will need to get some sort of fuel manager with that air cleaner. I did not at first and my pulgs were scary white! I did the SEST and was able to get 76 hp bike screams now.

illetrop79: hey man , is the belt gaurd a hassel to take off ?

Dave McNamara: Your bike is looking awesome, I love the mods, they go well with the bike. What mirrors are those? and do you have a link?

IIIsticksone: Thanks for the kind words! I am happy with it on the fork, I can see all the lights and guage well. I have seen others mount it on the left side of the engine but I think the forks make it easier to see.

Shan DaMan: very nice mods! I bought an 09 nightster and your pegs, air filter and gas cap are the ones i was planning on putting my bike. They look great! Thanks for putting up the video, it gave my an idea of how things are going to look! Thanks again, ride safe!

chopperchefrz: killer gas cap!

IIIsticksone: @geoff1408 Thanks man! Making it my own is what it is all about.

edg crocker: Good job on the bike it looks great

scienceguy72: Hey man I did the headlight relocation too and I can't for the life of me find a mounting block that has over two inches of vertical offset. I listened to your vid and tried both JP and Headwinds with no luck. Any ideas? Thanx!

geoffrey wright: the thing i like about this bike is , there is no other like it, one of kind good job mate well done and thanks for sharing.

IIIsticksone: I am not sure on that one. I dont know where the pegs mount.

JaketheSnake904: @IIIsticksone How much would you want for em?

IIIsticksone: @kyleneva Thanks for the kind words. I have not seen Joker Machine stuff on sale it is spendy but good quality parts. Check out LowBrow Customs when you order. Those dudes are solid and will get it to you quick. Good luck with your ride.

Spencerian: Nice Mod.

bdubdgaf: dose the saddle bag cover the area where the passenger foot peg installs? I really want the same bag but dont know if I can sacrafice the passenger peg, my ol' lady likes riding to much

schellingr: Very very nice!

JaketheSnake904: Where did you get those hande bars?

brandonm1392: seems lke your more concerned with the look then the actual performance

vzhdnightster08: nice bike man, I just got the speedo kit and was wondering if you had to take the front tire off to slide the fork tube down or can you just slide both down what's easier?

IIIsticksone: Thanks man. I am really happy with the bag. It is nice to be able to carry a few things without wearing a backpack.

IIIsticksone: I just slide both forks down. I did not take the front tire off. I markded the forks where they need to go in the clamps so when I put them back I knew they were even. I had to use a strap to pull the tire close to the frame in order to get the forks to slide back in the trees. When lifted they will tend to go away from the frame. Does that make sense? Good luck let me know if I can help. It is a sweet product that I am sure you will like.

Attila .Godolley: Nice nightster i would start looking for some new rear shocks , mine wore out after only 5000 kms

catalinaisland2: Hey brother, bike looks nice! I just picked up one of those spedo relocators and am about to mount it. Was wondering if you liked where it mounts on the forks? Were you considering mounting it anywhere else?

Rating:
Harley Nightster Mods 4.7 out of 5

Shared by Others

Harley Nightster 2009 with some mods
Harley Nightster 2009 with some mods
Harley Davidson Nightster 1200
Harley Davidson Nightster 1200
Harley Nightster 2010 with mods
Harley Nightster 2010 with mods
Custom Harley Davidson Sportster 1200 Nightster
Custom Harley Davidson Sportster 1200 Nightster
2007 Harley Davidson Nightster Bobber
2007 Harley Davidson Nightster Bobber
Nightster Mods - Part 8 of 8
Nightster Mods - Part 8 of 8
Harley Nightster Speedometer Relocation PART 2
Harley Nightster Speedometer Relocation PART 2
2008 Harley Davidson XL1200N Nightster Sportster
2008 Harley Davidson XL1200N Nightster Sportster
Harley Nightster: RSD 2011 Product Video P.2. Café Sportster
Harley Nightster: RSD 2011 Product Video P.2. Café Sportster
harley davidson sportster nightster.MOD
harley davidson sportster nightster.MOD
2009 Harley Davidson Sportster nightster bobber
2009 Harley Davidson Sportster nightster bobber
Harley Nightster Speedometer Relocation PART 1
Harley Nightster Speedometer Relocation PART 1
'08 XL1200N Harley Davidson Nightster Short Shots
'08 XL1200N Harley Davidson Nightster Short Shots
Harley Davidson Sportster 1200 Nightster  with Penzl Exhaust
Harley Davidson Sportster 1200 Nightster with Penzl Exhaust
2008 Harley Davidson Nightster
2008 Harley Davidson Nightster

Featured Video