shane goodman: if he had shoot with that gun of this video we will be have one more failvideo on the internet :D
DangerD205: No, I shot one roundn that was double the power the firearm could take, and it shred into about 20 pieces...including dangerous shards of metal.
titandagod: so u jus shot it too fast repeatedly?
DangerD205: As in "too many grains".
titandagod: what do u mean by high load?
kieran james: how big does the barrel need to be and at what lenth is the whole if your using 9mm
OoMrTurkoO: it is illegal
EDWARD WAYNE WHITALL: i need your help!
coolmike1989: I like what he did. But I hope he didn`t load his .380 (yes .380 because a 9mm is too long for blank gun mags) with the powder of blank cartridges otherwise he has no more hand, face or might even be dead. Cool vid thanks for the upload I might try this one day. For now I have enough safer alternatives in my closet.
drogpa drogpa: لو اللى بيحصل ده فى مصر يبقى يالا السلامة انا مش مصدق ان شبابنا زصل لكده اظن انها هتبقى غابة السلاح فيها يصنع فى البيوت والورش وسوف يمتلك السلاح كل بلطجى يروع به الناس ويسرق ويقتل ولن تستطيع الشرطه مواجة بلطجى متسلح فان عاتبت جارك اوتخاصمتم فلا تستبعد ان يرفع فى وجهك سلاح الللهم احفظنا
Garras Porgratix: How come you didn't shoot it with real ammo? I want to see how that project works out.
omfgrifk: Luckily the 7,65 br. bullit that it will be pushing forwards weighs only 71 grains, and the barrel is smoothbore, so there wont be that much of a backpressure.
tuipale: 9mm handguns have an optimum range of ~35meters and it drops down to 20meters with smooth bore. I can see that barrel made in the video is prob machined from very common AISI 304 steel because any super strong cold rolled steel types are extremely expensive or hard to find (CRMO 41xx is good steel for barrels/frames/bolts because it decays very slowly unlike AISI steel and its very tough + heat-treatable) 6.35mm x 1m² plate of CRMO 4130 costs ~900eur and CRMO 1.6mm wire (for welding) 40e/kg.
challenqer snitch: elinde patlar
rudedude10458: If you like guns, move outta NJ, just like I bailed from NY.
The gun laws south of Maryland are sweet.
rudedude10458: Also, a stripped AR lower receiver is still considered an "assault weapon" in NYC, Chicago & DC (prob other places too). Possession of a 3D printed lower, whether you made it or not, in any of those places mentioned would constitute a SERIOUS FELONY get you GUARANTEED prison time.
rudedude10458: Most states outside of the northeast, do not require any permits to own or open-carry firearms. Federal law does not restrict the manufacture of a gun for non-commercial purposes., You can make yourself a gun, if you are not prohibited from owning firearms, however, you cant sell it or even give it away. Some states require you to REGISTER you guns, particularly handguns. In CA, MA & DC the self-made gun is not on the list of approved firearms, so you cant make or possess it.
NJrezident: For what ive heard, here in the US u cant purchase a gun without a permit, but there is no law about making your own gun, reason for permits and registering is to keep track of your guns activity or "fingerprint" just look at the guy who made an AR-15 out of a 3D printer, all real AR parts except for the reciever which is the part that needs the permit unless u make ur own and its legal...so i hear
Imtiaz Patel: What about the Magna Carta
Imtiaz Patel: Vedicpagan
So viet An: is it safe to use a live round to work with instead of a dummy 1?
i'd love to c it in action homie,great work
Machiu Gutierrez: take this video down you freakin idiot.
ihategayersupreme: dude 5 grains is normal .380 ACP load those blank guns won't blow up from one shot of it,a 9mm PAK has more powder as factory .380 ACP round and Ekol's can fire 1000+ of those without blowing up you're talking crap
UNN Von Braun: cool "lathe"
Sam LaFiura: Do you honestly think glue will hold a barrel on shooting a live round? And if so.. It must be some crazy freakin glue
Kenny N.: Same here in America. Even our 2nd Amendment doesn't hold against a bunch of idiots with political power. No law can stop arrogance or corruption. It's not so bad, though.. We still have access to things like fossil fuels, wicks, glass bottles, nails and fireworks. Why fight though, when 50 years later things will get screwed again? Could it be that everyone wants to rule the world and revolution feeds the rebel's ego? In the end, I think it's about ego and/or power over others.
logan langer: entire chamber cut off on this on and completely replaced but yes glued in i have seen this done on the same model
mickeyblueeyes78: am i right in thinking the barrel was cut off and the chamber drilled to the OD of the new barrel and glued in?
holyfriar: Yes, how does he fix the barrel?did you get any answer?
holyfriar: Yes, how do you fix the new barrel onto the gun?
Arcqueid: I wouldn't shoot that that pistol ,but I am impressed with your work. :)
MaGIKzIIx: Is this video Evan legal to be on here lol
kemoo62: How do you fix the barrel with the body of the pistol????
ilganis: I know this guns the slide isnt chanched therefore is very dangerous to shot with it .32 acp ammo.
TheRicheg: woh?? heard of magna carta , besides bows & crossbows are completely legal in the uk any foot poundage eg50lb as long as you dont use them for hunting and use in safe places, what i mentioned with the co2 ect all theoretical just common seance... and you need FAC licenses for co2 rifles over 12lb also thare is a disused cartridgeact that makes some old precution non deactivated type pistols legal without licence... wtf i would imagen black powder a mold -lead and cap gun caps culd get you thert
vedicpagan: actuall according to the british constitution ITS ILLEGAL to prevent us from having arms for self defence or defence of the realm its UNLAWFUL statutes & bogus acts that tricked us into thinking its ilegal AMERICA GOT ITS 2ND AMENDMENT FROM US BRITS ,AND ITS STILL VALID TO THIS DAY AND ACTUALLY UNLAWFUL TO CHARGE US OR JAIL US FOR HAVING FIREARMS the banker gov lied LOL PITY THE STUPID POPULATION OF BRITAIN NEVER BOTHERED TO LOOK AT MAGNA CARTA & OUR CONSTITUTION BEFORE GIVING UP THERE ARMS LOL
Vegard Håskjold: what?!
castlegreyskull100: Really, what statute?
luis carlos de araujo lima: hi friend good night! I was wondering if this worked because its production enterecsei me quite q stuff you used with kitty?
Alterwisher: This is 5 years in prison.
callerofmusic: dont let a democrat see this video.....
TheRicheg: hmmm dont do this , he dint even ream the barrel never mind rifle it nor did he shw you how the extractor works and mountings are cut.. id be just as happy with a co2 fire extinquisher seald to a tube by electronic selenoid that i can put 1.5" inch ball bareings in . maybe even a zip gun if ammo was legal in the uk
logan langer: jb weld very strong epoxy can withstand almost the same pressures as real welding also known as liquid metal
ronzor007: There is no gunsmith and no boar in the barrel in this video dude.
Didnt see cart rage either.
Obvoiusly,drugs are not good for you.
DEATH111183: first i've ever seen of a "Blank gun" not to mention, first i've ever seen a gunsmith not even properly boar the barrel with riflings to make a spinning motion for the discharged bullet head. that gun would have the same accuracy as an old cartrage gun, i've used both a modern hand gun and the cartrage pistols, the modern ones are more accurate due to the threading down the barrel that makes the bullet spin in midflight. i'd be more accurate knives than that gun you just smithed my friend.
jay rudeboi: I love dis vid just wnt to no how did he fit the barrel to the frame realy need to know cos got a ekol f92 cumming and the barrel is mounted the same as this thanks.
DangerD205: You're an idiot (no offense) If you glue the slide, how will it cycle? It takes less than 1kg of force on a slide to keep it from cycling...LUBRICATION would make more sense, and if you need more weight, put a lazer or light on the front...You don`t need more weight, just LESS CHARGE...
DangerD205: I am a licensed gunsmith, you don't need to preach to me. I was testing the limits of the material...I have a VOLGA-B Front Fire and so far have shot 200+ .380 rounds out of it with less than 10% jamming, and all I did was drill the barrel and lower the shell charge from 6,6g to 2,5g...
ronzor007: No wonder that a double blank charge makes your zink/zamak gun go kaboom.
Remember that these blankfirers have an blowback action.
The force pushing the bullit forward is the same on the slide moving towards your face.
The slide has to counteract this motion by weight and hopefully will be slow enough at the end of the action.
If not: the pot metal slide begins to crack or worse breaks off at the front where there is just a few mm of metal to hold it against the frame.
Then it flies back..